Charles Proteus Steinmetz was a towering figure in the early decades of electrical engineering, easily the intellectual equal of Thomas Edison and Nikola Tesla—men he considered his friends. One of Steinmetz’s most significant achievements was to quantify and characterize the phenomenon of magnetic hysteresis—the behavior of magnetism in materials—and then devise a simple law that allowed for predictable transformer and motor design. He also established a revolutionary framework for analyzing AC circuits, which is still taught today in power engineering. And from 1893, he served as chief consulting engineer at General Electric at a pivotal moment for the young company and for the U.S. effort to expand its power grid. For these and other accomplishments, he was well known in his time, even if he’s not exactly a household name today.
Steinmetz was also an evangelist for electric vehicles. In March 1920, he typed out his thoughts, comparing the pros and cons of EVs to the gasoline-propelled alternative. Among the advantages: low cost of maintenance, reliability, simplicity of operation, and lower cost of operation. The disadvantages: dependence on charging stations, limited range on a single charge, and lower speeds. More than a century later, his list remains remarkably pertinent.
Steinmetz could often be seen decked out in a suit and top hat, smoking his trademark BlackStone panatela cigar while riding around Schenectady, N.Y., in his 1914 Detroit Electric sedan. According to John Spinelli, emeritus professor of electrical and computer engineering at Union College, in Schenectady, sometimes both Steinmetz and his chauffeur sat in the backseat—you could control the car from both the front and the rear—so that it would appear to be a driverless car. With a top speed of 40 kilometers per hour (25 miles per hour), the car ran on 14 six-volt batteries and could go about 48 km between charges.
Steinmetz’s 1914 Detroit Electric car is now at Union College in Schenectady, N.Y., where Steinmetz had founded, chaired, and taught in the department of electrical engineering.Paul Buckowski/Union College
In 1971, the car was purchased by Union College, where Steinmetz had founded, chaired, and taught in the department of electrical engineering. The car had been discovered rotting in a field, so it needed some work. Over the next decade, faculty and engineering students restored it to its former glory. Still in running condition, it’s now on permanent display at the college.
Steinmetz’s Contributions to Electrical Engineering
Karl August Rudolf Steinmetz was born in 1865 in Breslau, Prussia (now known as Wrocław, Poland). He studied mathematics, physics, and the burgeoning field of electricity at the University of Breslau. He also joined a student socialist club and edited the party newspaper, The People’s Voice. He completed his doctoral studies, but before receiving his degree, Steinmetz fled to Switzerland in 1888, after his socialist writings came under the scrutiny of the Bismarck government.
Steinmetz immigrated to New York the following year, anglicized his first name, dropped his two middle names, and added Proteus, a nickname he had picked up at university (after the shape-shifting sea god of Greek mythology). Eventually, he became a U.S. citizen.
Charles Proteus Steinmetz solved a number of important problems that helped the power grid expand.Bettmann/Getty Images
In January 1892, Steinmetz burst onto the engineering scene when he read his paper “On the Law of Hysteresis” before the American Institute of Electrical Engineers, a forerunner of today’s IEEE. I can’t quite imagine sitting through the delivery of its 62 pages, but those assembled recognized its groundbreaking nature. The ideas Steinmetz outlined allowed engineers to calculate power losses in the magnetic components of electrical machinery during the design phase. Prior to this, the design process for transformers and electric motors was largely trial and error, and power losses could be measured only after the machine was built, which greatly added to the cost.
Steinmetz was not just an equations and theory guy, though. He loved working in the lab and building things. In 1893, General Electric acquired the small manufacturing firm of Eickemeyer & Osterheld, in Yonkers, N.Y., where Steinmetz had worked since shortly after his arrival in the United States. So Steinmetz began his new life as a corporate engineer, an interesting turn for the socialist. During his first few years with GE, he mostly designed generators and transformers. But he also created an informal position for himself as a consultant, giving expert opinions on various problems across divisions. He eventually formalized this role, becoming GE’s chief consulting engineer, and he maintained a relationship with the company for the rest of his life, even after joining the faculty of Union College in 1902.
By the time Steinmetz died in 1923 at the age of 58, he had been granted more than 200 patents and had made major contributions to various subfields in electrical engineering, including phasors and complex numbers (for steady-state AC analysis); electrical transients, switching surges, and surge protection (based on his research on lightning); industrial research (including how to run a corporate lab); and engineering methods (by writing textbooks that standardized practice).
Why Steinmetz Believed in Electric Cars
By 1914, Steinmetz was convinced that the future of transportation was electric. In June, he addressed the National Electric Light Association convention in Philadelphia with a bold prediction: __“__I have no doubt that in 10 years, more or less—rather less than more—we will see the field of the pleasure and business vehicle covered by such an electric car in large numbers. And I believe I underestimate when I say that 1,000,000 or more will be used.”
As we now know, Steinmetz was overly optimistic. At the time, there were about 1.2 million gasoline-powered cars in use in the United States, and only about 35,000 EVs. It would take until 2018 for the number of EVs (including plug-in hybrids) on U.S. roads to surpass a million. Worldwide, there are now about 60 million electric vehicles in use.
But Steinmetz had his reasons. He firmly believed that electric vehicles would flourish in urban areas, where most rides involved short distances at low speed. He also thought EVs would be a boon for power companies, which were eager to drum up more business, especially at night. With 1 million electric cars being charged about 5 kilowatt-hours on most nights, and at a rate of 5 cents per kilowatt-hour, Steinmetz predicted US $75 million (about $2.5 billion today) of new business for central power stations each year.
In 1971, Union College purchased Steinmetz’s car, which had been found rotting in a field, and faculty and students restored it to working condition.Special Collections & Archives/Schaffer Library/Union College
Steinmetz went to work to improve the electric car. He developed a double-rotor motor that was integrated into the rear axle, which did away with the need for a mechanical differential or drive shaft and drastically reduced the overall weight, which improved the mileage. Dey Electric Corp. incorporated Steinmetz’s design into its electric roadster and priced it under $1,000. Unfortunately, an internal combustion engine Ford Model T cost about half as much, and the Dey roadster flopped, ending production within a year.
Undeterred, Steinmetz formed the Steinmetz Electric Motor Car Corp. in 1920 with the initial goal of bringing to market an electric truck for deliveries and light industrial use. The first truck debuted on a cold February day in 1922 with a publicity stunt of climbing the steep Miller Avenue hill in Brooklyn, N.Y. According to a report in The New York Times, the vehicle went up the 14.5 percent grade between Jamaica Avenue and Highland Boulevard in 51 seconds. During a second climb, it stopped a number of times to show how easily it restarted. The truck had a range of 84 km (52 miles).
The company planned to manufacture 1,000 trucks per year and 300 lightweight delivery cars, plus a five-passenger coupe, but it made a total of only 48 vehicles. After Steinmetz died in 1923, the company soon ceased operation.
Steinmetz wasn’t only bullish on the electric car, but on electricity in general. A New York Times article recorded his belief that by 2023, we would work no more than 4 hours a day, 200 days a year because electricity would have eliminated the drudgery and unpleasantness of labor. He also predicted that electricity would bring about an end to urban pollution: “Every city would be a spotless town.” With an expansion of leisure time, people would be healthier, engaging in gardening (especially growing their own food) and pursuing educational interests to become “much more intelligent and self-expressive creature[s].”
Steinmetz’s Chosen Family
I decided to write about Steinmetz last year, after IEEE Spectrum published an essay I wrote about why engineering needs the humanities. The article contains this line: “In 1909, none other than Charles Proteus Steinmetz advocated for including the classics in engineering education.” I had been impressed to learn of Steinmetz’s recognition of the value of a liberal arts education. But my copy editor didn’t know who Steinmetz was or why he merited the qualifier “none other.” More people should know about this remarkable man, I decided. And so I went looking for a museum object associated with him, so I could include him in a Past Forward column.
Steinmetz [left] was easily the intellectual equal of Thomas Edison [right], whom he considered a friend.Corbis/Getty Images
The electric car is only one avenue into Steinmetz’s life. I could instead have looked into Steinmetz solids (the geometric shapes that form when two or three identical cylinders intersect at right angles), Steinmetz curves (the edges of a Steinmetz solid), or the Steinmetz equivalent circuit (a mathematical model that describes a transformer using resistors and inductors). But none of those concepts could be easily captured in a picture-worthy object. His love of his electric car, on the other hand, was a fun and fitting entry point for this most unusual engineer.
I also saw an opportunity to highlight how Steinmetz became a family man. Steinmetz had dwarfism—he stood just 122 centimeters tall—as well as kyphosis, a severe curvature of the spine, as did his father and grandfather. He didn’t wish to pass along those traits, and so he never married or had children of his own. But that didn’t mean he didn’t want a family.
In 1903, Steinmetz’s favorite lab assistant, Joseph LeRoy Hayden, told his boss that he was getting married. Steinmetz invited the couple to dinner, and then invited them to live in his large home. They agreed to this unusual living arrangement, with Corinne Rost Hayden running the household and cooking for her husband and Steinmetz. She forced the men to set aside their work for regular family meals.
Eventually, the Hayden family expanded, welcoming Joe, Midge, and Billy. Steinmetz legally adopted the elder Hayden, thereby gaining three grandchildren as well. Steinmetz, whom The New York Times had named a “modern Jove” who “hurls thunderbolts at will” (from a high-voltage lightning generator), delighted at entertaining the grandkids with wondrous tricks of electricity and chemistry.
In writing about the history of electrical engineering, I sometimes fall into the trap of focusing too much on the technology. But it’s just as important to recognize the people behind the technology—their personalities, their frailties, their feelings, their challenges. Steinmetz faced adversity for his political beliefs, for being an immigrant, and for his physical stature, yet none of that ever stopped him. In word and deed, he showed that he had a generous heart as mighty as his intellect.
Part of a continuing series looking at historical artifacts that embrace the boundless potential of technology.
An abridged version of this article appears in the March 2026 print issue as “Charles Proteus Steinmetz Loved His Electric Car.”
Instagram Engineering
Shopify Engineering